LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 136 (Engine Mechanical - 3.6L (LF4) - Repair Instructions (2 Of 4)) >> Repair Instructions >> Timing Chain Guide Replacement - Bank 1 Pivot Arm >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5876046

    Engine Front Cover (1) - Remove - Engine Front Cover Removal and Installation 

  2. GM5892078

    Using the EN-48589  Crankshaft Rotation Socket (1) rotate the crankshaft and crankshaft sprocket to stage 2 alignment position.

  3. Verify the timing components are correctly aligned for stage 2. Timing Chain Alignment Diagram
  4. GM5880882

    Install the EN-48383 - 3  Camshaft Retaining Tool (1).

  5. GM5880894

    Compress the timing chain tensioner plunger (1) and install the EN-46112  Tensioner Retraction Pin (2).

  6. GM5880885

    Timing Chain Tensioner Bolt (1) - Remove [2x]

  7. Timing Chain Tensioner (2) - Remove
  8. Timing Chain Tensioner Gasket (3) - Remove and DISCARD
  9. GM5880897

    Timing Chain Guide Pin (1) - Remove

  10. Timing Chain Guide (2) - Remove
scientia non olet · About LEMON Manuals