Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Drain the cooling system. Cooling System Draining and Filling (LSY GE 47716) , or Cooling System Draining and Filling (LSY Static Fill) , or Cooling System Draining and Filling (LSY with V03 Static Fill) , or Cooling System Draining and Filling (LSY with V03 GE 47716)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Hose Clamp (1) - Disengage [2x] - Hose Clamp Replacement Guidelines - Spring Type
- Automatic Transmission Fluid Cooling Heat Exchanger Inlet Hose (2) - Remove
Hose Clamp (1) - Disengage [2x] - Hose Clamp Replacement Guidelines - Spring Type
- Automatic Transmission Fluid Cooling Heat Exchanger Outlet Hose (2) - Remove
Transmission Fluid Cooler Pipe Nut (1) - Remove [2x]
- Cap the fittings and plug the holes when removing the transmission fluid cooler pipes.
- Transmission Fluid Cooler Inlet and Outlet Pipe (2) @ Automatic Transmission Fluid Cooling Exchanger - Remove [2x]
Transmission Fluid Cooler Pipe Seal (1) - Remove and DISCARD [2x]
Transmission Fluid Auxiliary Cooler Bolt (1) - Remove [2x]
Transmission Fluid Auxiliary Cooler Bracket Nut (1) - Remove
- Automatic Transmission Fluid Cooling Exchanger (2) - Remove
Hose Clamp (1) - Disengage [2x] - Hose Clamp Replacement Guidelines - Spring Type
- Thermostat Bypass Hose (2) @ Engine Oil Cooler - Remove
- Thermostat Bypass Hose (2) @ Engine Coolant Thermostat Housing Pipe - Remove
- Lower the vehicle.
Hose Clamp (1) - Disengage - Hose Clamp Replacement Guidelines - Spring Type
- Thermostat Bypass Hose (2) @ Engine Coolant Flow Control Valve - Remove
Thermostat Bypass Hose (1) - Remove