LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Engine Heating And Cooling - Repair Instructions (2 Of 2)) >> Repair Instructions >> Electric Engine Coolant Pump Replacement (LSY) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5323996

    Water Pump Cover (2) - Install

  2. CAUTION:

    Refer to Fastener Caution .

  3. Water Pump Cover Bolt (1) - Install and tighten [3x] - Fastener Specifications
  4. GM5323983

    Engine Wiring Harness Bracket (2) - Install

  5. Engine Wiring Harness Fuse Block Bracket Bolt (1) - Install and tighten [2x] - Fastener Specifications
  6. GM5323976

    Electric Water Pump (1) - Install

  7. GM5314807

    Install the electric water pump (2) into the auxiliary water pump outlet upper hose (3).

  8. Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
  9. GM5314798

    Water Pump Bolt (1) - Install [2x] - Fastener Specifications

  10. GM5314789

    Water Pump Bolt (1) - Install - Fastener Specifications

  11. GM5524599

    Electrical Connector (2) @ Electric Water Pump - Connect

  12. Engine Wiring Harness Retainer (1) @ Engine Wiring Harness Bracket - Install [3x]
  13. Position the wiring harness tie strap in place and install to the engine wiring harness bracket.
  14. GM5323717

    Auxiliary Water Pump Inlet Pipe (2) @ Electric Water Pump - Install

  15. Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
  16. GM5323963

    Radiator Outlet Hose (2) @ Electric Water Pump - Install

  17. Hose Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
  18. GM5314511

    Charge Air Cooler Inlet Air Tube (2) @ Turbocharger (3) - Install

  19. Retainer Spring (1) - Engage
  20. GM5405482

    Air Cleaner Assembly (1) - Install

  21. GM5405481

    Air Cleaner Bolt (1) - Install and tighten - Fastener Specifications

  22. Connect the electrical connector and install all wiring harnesses to the air cleaner assembly.
  23. GM5405476

    Air Cleaner Outlet Duct (1) - Install

  24. Connect the electrical connector.
  25. GM5405472

    Positive Crankcase Ventilation Tube (3) - Connect - Plastic Collar Quick Connect Fitting Service

  26. Evaporative Emission Canister Purge Tube (2) - Connect - Plastic Collar Quick Connect Fitting Service
  27. Air Cleaner Outlet Duct Clamp (1) - Tighten [2x] - Fastener Specifications
  28. Fill the cooling system. Cooling System Draining and Filling (LSY GE 47716) , or Cooling System Draining and Filling (LSY Static Fill) , or Cooling System Draining and Filling (LSY with V03 Static Fill) , or Cooling System Draining and Filling (LSY with V03 GE 47716)
  29. Start the engine and check for coolant leaks.