Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Install the NEW positive crank ventilation foul air tube (2) and secure the 2 positive crankcase ventilation tube connectors (1).
Turbocharger Wastegate Actuator Vacuum Source Tube (2) - Install
- Turbocharger Wastegate Actuator Vacuum Source Tube (2) - Connect - Plastic Collar Quick Connect Fitting Service
- Clamp (1) - Engage - Hose Clamp Replacement Guidelines - Spring Type
Charge Air Bypass Valve Vacuum Tank Tube (2) - Install
- Charge Air Bypass Valve Vacuum Tank Tube (2) - Connect - Plastic Collar Quick Connect Fitting Service
- Clamp (1) - Engage [2x] - Hose Clamp Replacement Guidelines - Spring Type
Oil Filler Cap - Remove
- Intake Manifold Cover (2) - Install
- Intake Manifold Cover Bolt (1) - Install and tighten - Fastener Specifications
- Oil Filler Cap - Install
NOTE:
Some components not shown for graphic clarity.
CAUTION:
Refer to Fastener Caution .