LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Engine Controls And Fuel - 3.6L (LF4) - Repair Instructions (1 Of 3)) >> Repair Instructions >> Fuel Pressure Gauge Installation and Removal >> Special Tools

Special Tools

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Equivalent regional tools: Special Tools (Mechanical Tools) , or Special Tools (Diagnostic Tools)

WARNING:

Fuel/gasoline vapors are highly flammable. A fire could occur if an ignition source is present. Never drain or store gasoline or diesel fuel in an open container, due to the possibility of fire or explosion. Have a dry chemical (Class B) fire extinguisher nearby.

WARNING:

Wrap a shop towel around the fuel pressure connection in order to reduce the risk of fire and personal injury. The towel will absorb any fuel leakage that occurs during the connection of the fuel pressure gauge. Place the towel in an approved container when the connection of the fuel pressure gauge is complete.

CAUTION:

Clean all of the following areas before performing any disconnections in order to avoid possible contamination in the system:

  • The fuel pipe connections
  • The hose connections
  • The areas surrounding the connections