Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Turbocharger Wastegate Regulator Solenoid Valve (1) - Install
- Charge Air Bypass Valve Vacuum Source Tube (2) @ Turbocharger Wastegate Regulator Solenoid Valve (1) - Connect
- CAUTION:
Refer to Fastener Caution .
Turbocharger Wastegate Actuator Vacuum Tank Bolt (3) - Install and tighten [2x] - Fastener Specifications
- Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube (2) @ Turbocharger Wastegate Regulator Solenoid Valve - Connect [2x]
- Engage the 2 turbocharger wastegate actuator vacuum source tube clamps (1). Hose Clamp Replacement Guidelines - Spring Type
- Connect the turbocharger wastegate regulator solenoid valve electrical connector.
Oil Filler Cap - Remove
- Intake Manifold Cover (2) - Install
- Intake Manifold Cover Bolt (1) - Install and tighten - Fastener Specifications
- Oil Filler Cap - Install
- Perform the intake system learned values reset. Intake System Learned Values Reset