LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 127 (Engine Controls And Fuel - 3.6L (LF4) - Repair Instructions (2 Of 3)) >> Repair Instructions >> Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Oil Filler Cap - Remove
  2. GM5839283Courtesy of GENERAL MOTORS COMPANY

    Intake Manifold Cover Bolt (1) - Remove

  3. Intake Manifold Cover (2) - Remove
  4. Install the oil filler cap after removal of the intake manifold cover to prevent debris from falling into the engine.
  5. GM5839308Courtesy of GENERAL MOTORS COMPANY

    Disengage the 2 turbocharger wastegate actuator vacuum tank solenoid valve tube clamps (1).

  6. Retainer (2) - Disengage
  7. Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube (3) @ Auxiliary Air Cleaner Outlet Duct - Disconnect - Plastic Collar Quick Connect Fitting Service
  8. Turbocharger Wastegate Actuator Vacuum Tank Solenoid Valve Tube (4) - Remove
scientia non olet · About LEMON Manuals