Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Wheelhouse Liner-Right Side - Remove - Rear Wheelhouse Liner Replacement
Evaporative Emission Canister Air Inlet Hose (1) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Vent Hose (2) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Evaporative Emission Canister Purge Hose (3) - Disconnect - Plastic Collar Quick Connect Fitting Service
Disconnect the electrical connector.
- Evaporative Emission Canister (1) - Remove
- NOTE:
Turn the solenoid clockwise to remove.
Evaporative Emission Canister Vent Solenoid Valve (1) - Remove
NOTE:
Release retaining tab to remove evaporative emission canister.