LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Engine Controls And Fuel - 3.6L (LF4) - Diagnostic Information And Procedures (3 Of 3)) >> Diagnostic Information and Procedures >> DTC P103B or P103C >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle - Off
  2. Disconnect the electrical connector: X2 @ K20 Engine Control Module
  3. Test circuit 5294 for an open/high resistance between the test points: Ignition circuit terminal 37 @ Control module harness & Output terminal @ Fuse
    • If the circuit is open/high resistance 

      Repair the open/high resistance in the circuit.

    • Go to next step: If the circuit is not open/high resistance 
  4. Replace the component: K20 Engine Control Module
scientia non olet · About LEMON Manuals