LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Engine Controls And Fuel - 2.0L (LSY) - Diagnostic Information And Procedures (3 Of 3)) >> Diagnostic Information and Procedures >> DTC P1467-P146A, P148E-P1490, P14A4, U111E, or U137A >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

For an overview of the component/system, refer to: Evaporative Emission Control System Description

Circuit Description
Ignition Supplied from a fuse.
Serial Data Digitally encoded information for communication between devices.
Ground Chassis Ground
Component Description
G58 Evaporative Emission Canister Purge Pump The assembly contains the following components:
  • EVAP Purge Pump - The pump is driven by a 12 V DC motor.
  • EVAP Purge Pump Pressure Sensor - The sensor measures the pressure in the component: Evaporative Emission (EVAP) Purge System
K20 Engine Control Module The control module contains a microprocessor used to process input data to control outputs.
The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
scientia non olet · About LEMON Manuals