LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 121 (Engine Controls And Fuel - 2.0L (LSY) - Diagnostic Information And Procedures (3 Of 3)) >> Diagnostic Information and Procedures >> DTC P12A6 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition On
  2. Verify the scan tool parameter:
    • Fuel Pump Enable Circuit High Voltage Test Status = Okay
    • Fuel Pump Enable Circuit Low Voltage Test Status = Okay
    • Fuel Pump Enable Circuit Open Test Status = Okay
    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  3. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
  4. Verify the DTC does not set.
    • If the DTC sets 

      Refer to: Circuit/System Testing

    • Go to next step: If the DTC is not set 
  5. All OK.
scientia non olet · About LEMON Manuals