Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify there are no DTCs set related to the following component/system: Serial Data
- If a related DTC is set
- Go to next step: If a related DTC is not set
- Clear the DTCs.
- Operate the vehicle within the Conditions for Running the DTC.
Verify the DTC does not set.
- If the DTC sets
- Ignition/Vehicle - Off
- Replace the component: Transmitting Component - Refer to: Transmitting and Receiving Components
- Operate the vehicle within the Conditions for Running the DTC.
Verify the DTC does not set.
- If the DTC sets
Replace the component: Receiving Component - Refer to: Transmitting and Receiving Components
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.
- Go to next step: If the DTC does not set
- All OK.