Conditions for Running the DTC

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

P08A8

Verify DTC P0807, P0808 is not set.
Verify there are no DTCs set related to the following component/system:
- B26 Crankshaft Position Sensor
- B115 Vehicle Speed Sensor/B14A Transmission Output Shaft Speed Sensor
Current Gear = Valid - Calculated
Engine Torque = Greater than a predefined threshold
Ignition and Start Switch Signal = On
Vehicle Speed = Greater than a predefined threshold

Frequency the DTC runs = Continuously - After the running conditions are met

P08A9, P08AA

Ignition and Start Switch Signal = On

Frequency the DTC runs = Continuously - After the running conditions are met