Clutch Housing

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Pump Outlet Pipe Fitting (1) - Remove and DISCARD
Transmission Case Plug (2) - Remove and DISCARD
Courtesy of GENERAL MOTORS COMPANY

NOTE:
There may be one or more input shaft bearing shim.

Input Shaft Bearing Race (1) - Remove
Input Shaft Bearing Shim (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
There may be one or more bearing shim.

Remove the countershaft bearing race (1) and one or more the shims (2).
Courtesy of GENERAL MOTORS COMPANY

Input Shaft Seal (1) - Remove and DISCARD
Courtesy of GENERAL MOTORS COMPANY

Using DT-45124 Removal Bridge (1), DT-49216 Bushing Remover (2), and a wrench, remove the shift shaft bearing (3).
Courtesy of GENERAL MOTORS COMPANY

Using J-23907-1 Slide Hammer (1) and J-39439-2 Bushing Remover (2), remove the 3rd and 4th shift shaft bushing (3).
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Pump Retaining Ring (1) - Remove
Transmission Fluid Pump (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Transmission Adapter Plug (1) - Remove
Transmission Fluid Pump Check Ball Spring (2) - Remove
Transmission Fluid Pump Check Ball (3) - Remove