Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Seat Back Cover and Pad (1) - Remove - Front Seat Back Cover and Pad Removal and Installation (with Seat Back Cushion Finish Panel) , or Front Seat Back Cover and Pad Removal and Installation (without Seat Back Cushion Finish Panel) , or Front Seat Back Cover and Pad Removal and Installation (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Use care when applying heat to the foam pad. Applying excessive heat in a single location may damage the foam pad, requiring replacement of the foam pad.

Using a heat gun, apply low heat in a sweeping motion to soften the adhesive prior to removal.

CAUTION:

Use care when removing the heater mat and/or vent fan mat. If damage to the foam pad occurs during removal, the pad must be replaced. Damage may include, but is not limited to, rips or tears, damage due to excessive heat, or excessive residual adhesive buildup.

Remove the front seat back vent fan mat (1) from the front seat back cover and pad (2).