Circuit/System Verification
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition/Vehicle in Service Mode.
- Verify that no DTCs are set.
- If any DTC is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If no DTCs are set
- If any DTC is set
- Verify the appropriate driver scan tool seat switch parameters listed below change between Inactive and Forward/Rearward or Up/Down when pressing the switch.
- Seat Horizontal Switch
- Seat Cushion Front Vertical Switch
- Seat Cushion Rear Vertical Switch
- Seat Back Switch
- If the parameter does not change
Test or replace the S64D Front Seat Adjuster Switch - Driver.
- Go to next step: If the parameter changes
- Verify the seat directional motors listed below operate while operating the appropriate seat switches in both directions.
- M50D Front Seat Tilt Adjuster Actuator - Driver
- M51D Front Seat Adjuster Actuator - Driver
- M55D Front Seat Vertical Adjuster Actuator - Driver
- M56D Front Seat Recliner Actuator - Driver
- If any seat motor does not operate
Refer to Circuit/System Testing.
- Go to next step: If all seat motors operate
- A fault is currently not present and may be an intermittent condition.