LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Power Seats) >> Diagnostic Information and Procedures >> DTC B1A65-B1A67 (DTC B1A65-B1A67 (Driver)) >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle OFF, disconnect the X3 connector at the K40D Driver Seat Adjuster Memory Module.
  2. Inspect the X3 harness connector and the module cavity for damage and corrosion.
    • If found to be damaged or corroded 

      Repair the connector or module cavity.

    • Go to next step: If found to be in good condition 
  3. Replace the appropriate K40D Driver Seat Adjuster Memory Module.
scientia non olet · About LEMON Manuals