Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Auxiliary Cooler Bracket (2) - Install
Transmission Fluid Auxiliary Cooler Bracket Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Radiator Front Duct (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Radiator Duct Retainer (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Auxiliary Radiator Duct Retainer (1) - Install [3x]
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Front Lower Baffle (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Front Lower Baffle Retainer (1) - Install [6x]
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Auxiliary Cooler (1) - Install
Transmission Fluid Auxiliary Cooler Bracket Nut (2) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Pipe Bracket Bolt (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Cooler Seal (2) - Install NEW
Transmission Fluid Cooler Inlet and Outlet Pipe (1) - Connect

CAUTION:

Refer to Fastener Caution .

Transmission Fluid Cooler Pipe Nut (3) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia (1) - Install - Front Bumper Fascia Removal and Installation (without Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing) , or Front Bumper Fascia Removal and Installation (with Blackwing CFV, CFZ)
Check the transmission fluid level. Transmission Fluid Level and Condition Check
Inspect for transmission fluid leaks. Fluid Leak Diagnosis