Removal Procedure
Front Bumper Fascia (1) - Remove - Front Bumper Fascia Removal and Installation
Forward Range Radar Bracket Bolt (1) - Remove [3x]
- Forward Range Radar Bracket (2) - Remove
- Disconnect the electrical connector.
Radiator Air Front Upper Baffle Retainer- Left Side (1) - Remove
- {If equipped} Radiator Air Lower Seal Retainer (2) - Remove [2x]
- Radiator Air Lower Baffle Retainer (3) - Remove [2x]
Front End Sheet Metal Cross Brace Bolt (1) - Remove [4x]
- Front End Sheet Metal Cross Brace (2) - Remove [2x]
Horn Bolt (1) - Remove [2x]
- Horn (2) - Reposition [2x]
Reposition the wiring harness.
- Front Bumper Impact Bar Bolt (1) - Remove [8x]
- Front Bumper Impact Bar (2) - Remove
NOTE:
Forward range radar sensor will be with the bracket.