Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
| Brake Master Cylinder Bracket |
| Push Rod Retainer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Electronic Brake Control Module Bolt | Electronic Brake Booster Control Module Replacement |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Hose Fitting Bolt | 40 N.m (30 lb ft) |
| Brake Master Cylinder Bolt | 8 N.m (71 lb in) |
| Brake Master Cylinder Bracket Bolt | 22 N.m (16 lb ft) |
| Brake Master Cylinder Nut | 22 N.m (16 lb ft) |
| Brake Master Cylinder Reservoir Bolt | 8 N.m (71 lb in) |
| Brake Pedal Bolt | 10 N.m (89 lb in) |
| Brake Pipe Fitting | 19 N.m (14 lb ft) |
| Brake Pressure Modulator Valve Bolt | 22 N.m (16 lb ft) |
| Brake Pressure Modulator Valve Pipe Fitting | 19 N.m (14 lb ft) |
| Brake Pressure Modulator Valve Primary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Brake Pressure Modulator Valve Secondary Brake Pipe Fitting | 19 N.m (14 lb ft) |
| Brake Pressure Modulator Valve Secondary Brake Pipe Fitting @ Brake Master Cylinder | 19 N.m (14 lb ft) |
| Power Vacuum Brake Booster Bolt | 22 N.m (16 lb ft) |