Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Power Vacuum Brake Booster (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Power Vacuum Brake Booster Bolt (1) - Install and tighten 22 N.m (16 lb ft) [2x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
A small amount of denatured alcohol may be used as a lubricant for assembly.

Install the power vacuum brake booster vacuum sensor (1) and hose assembly.
Connect the power vacuum brake booster vacuum sensor electrical connector.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Install a NEW brake pedal retainer.

Brake Pedal Retainer (1) - Install NEW
Brake Pedal Retainer (1) @ Brake Pedal (2) - Secure
Instrument Panel Lower Trim Panel Replacement - Left Side - Install - Instrument Panel Lower Trim Panel Insulator Replacement - Left Side
Brake Master Cylinder - Install - Brake Master Cylinder Replacement (LGX)