Rear Side Door Lock Striker Cover Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Open the rear side door.
1	Rear Side Door Lock Striker Cover Procedure Using the appropriate tool, place the tool between the outboard side of cover and pull upward from the striker. Align the inboard tabs on the rear side door lock striker cover to the outboard side of the striker and press into place.

Callout

Component Name

Preliminary Procedure
Open the rear side door.

Rear Side Door Lock Striker Cover

Procedure

Using the appropriate tool, place the tool between the outboard side of cover and pull upward from the striker.
Align the inboard tabs on the rear side door lock striker cover to the outboard side of the striker and press into place.