Removal Procedure

Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Outer Trim Cover - Left Side (1) - Remove - Instrument Panel Outer Trim Cover Replacement
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Lower Trim Plate Applique - Left Side (1) - Remove - Instrument Panel Lower Trim Plate Applique Replacement - Left Side
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Be sure to follow the service procedure when removing the trim panel. Failure to follow service procedure may cause damage to the trim panel.

NOTE:
For clarity the steering wheel and column have been removed in the illustrations.

Tape off or use a soft material to protect the section of the bezel (1) where indicated. If not protected, the bezel (1) will rub against the cluster trim plate (2).
Courtesy of GENERAL MOTORS COMPANY

Release the retainer clip with a plastic trim tool on the inboard side of the instrument panel accessory bezel (1). Clear the right edge from the instrument panel cluster trim plate.
Courtesy of GENERAL MOTORS COMPANY

Slide the instrument panel accessory bezel (1) to the right to release the tab from the instrument panel knee bolster.
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Accessory Bezel (1) - Remove
Disconnect the electrical connectors.
Transfer components as necessary.