Installation Procedure
Connect the electrical connectors.
Add tape to the area of the bezel that may interfere with the instrument panel cluster trim plate.
- Insert the instrument panel accessory bezel tab (1) into the instrument panel knee bolster careful to clear the instrument panel cluster trim plate.
Engage the instrument panel accessory bezel retainer clip (1) into the instrument panel knee bolster.
- Remove the protective material from the instrument panel accessory bezel (1).
Instrument Panel Lower Trim Plate Applique - Left Side (1) - Install - Instrument Panel Lower Trim Plate Applique Replacement - Left Side
Instrument Panel Outer Trim Cover - Left Side (1) - Install - Instrument Panel Outer Trim Cover Replacement