Removal Procedure
WARNING:
Refer to Brake Dust Warning .
WARNING:
Refer to Brake Fluid Irritant Warning .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (With J64) , or Tire and Wheel Removal and Installation (With J55) .
Disconnect the brake pipe fitting (1) from the brake hose.
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
Remove the brake hose retaining clip (1).
- NOTE:
Do not reuse the brake hose fitting gaskets.
Remove and discard the brake hose fitting gaskets (1) by removing the brake hose fitting bolt (2) from the brake hose fitting (3).
- Remove the brake hose from the vehicle.