Installation Procedure

Install the power brake booster vacuum pipe to the vehicle.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
A small amount of alcohol may be used as a lubricant. Do not use soap.

Install the power brake booster vacuum pipe hose (1) to the intake manifold and secure the clamp.
Courtesy of GENERAL MOTORS COMPANY

Install the power brake booster vacuum pipe to the retainer (1) on the intake manifold.
Courtesy of GENERAL MOTORS COMPANY

Connect the power brake booster vacuum pipe quick connect (1).
Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (LFX) , or Intake Manifold Cover Replacement (LF3) .