Removal Procedure
- With the engine OFF, apply the brake pedal several times until the brake pedal becomes firm to deplete the power vacuum brake booster vacuum reserve.
- Remove the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement (LF3) .
Remove the air cleaner outlet rear duct (2). Refer to Air Cleaner Outlet Rear Duct Replacement (LF3) .
Disconnect the power brake booster vacuum pipe quick connect (1).
Disconnect the power brake booster vacuum sensor electrical connector.
- Remove the power brake booster vacuum sensor (1) from the power vacuum brake booster.
Release the power brake booster pump inlet pipe retainer (1) from the dash panel stud.
Release the power brake booster pump inlet pipe from the retainer (1) on the right front brake pipe.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the right front wheelhouse front liner. Refer to Front Wheelhouse Front Liner Replacement .
Release the power brake booster pump inlet pipe clip (1) from the power brake booster pump hose.
Remove the power brake booster pump splash shield push pins (1).
- Remove the power brake booster pump splash shield.
Release the power brake booster pump inlet pipe retainer (1) from the power brake booster pump bracket.
- Disconnect the power brake booster pump inlet pipe quick connect (2).
- Remove the power brake booster pump inlet pipe from the vehicle.