Removal Procedure
WARNING:
Refer to Brake Dust Warning .
WARNING:
Refer to Brake Fluid Irritant Warning .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (With J64) , or Tire and Wheel Removal and Installation (With J55) .
Disconnect the brake pipe fitting (1) from the brake hose.
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
Remove the brake hose retaining clip (1).
Remove the front strut assembly pinch bolt (1) from the steering knuckle and brake hose bracket.
Remove the brake hose fitting bolt (1).
- Remove and discard the brake hose fitting gaskets (2) from the brake hose fitting (3).
- Remove the brake hose.
NOTE:
Do not reuse the brake hose fitting gaskets.