Installation Procedure
Attach the mechanics wire to the new cable and guide the cable in.
- Connect the hood primary latch release cable grommet (1) to the plenum upper panel.
Connect the hood primary latch release cable (1) to the inside handle. Hood Primary Latch Release Cable Handle Replacement
Attach the hood primary latch release cable to the retainers (2).
- Connect the cable end retainer (1) to the latch.
Air Inlet Grille Panel (1) - Install - Air Inlet Grille Panel Replacement
Front Compartment Side Sight Shield (2) - Install - Front Compartment Side Sight Shield Replacement
Front Compartment Front Sight Shield (3) - Install - Front Compartment Front Sight Shield Replacement