Front Side Door Upper Hinge and Lower Hinge Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front wheelhouse liner. Refer to Front Wheelhouse Front Liner Replacement .
1	Front Side Door Upper Hinge to Body Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Procedure Remove the front fender insulator as needed. Remove only one hinge at a time. Mark the location of the hinge before removing the bolts with a grease pencil. Support the door before removing the hinge bolts. Disconnect the door electrical connector. tighten 32 N.m (24 lb ft)
2	Front Side Door Upper Hinge to Door Bolt (Qty: 2) tighten 25 N.m (18 lb ft)
3	Front Side Door Upper Hinge
4	Front Side Door Lower Hinge to Body Bolt (Qty: 2) tighten 32 N.m (24 lb ft)
5	Front Side Door Lower Hinge to Door Bolt (Qty: 2) tighten 25 N.m (18 lb ft)
6	Front Side Door Lower Hinge Procedure Check the door for proper alignment, adjust as necessary. Refer to Front Side Door Adjustment .