LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Livery >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Brake Fluid Level Indicator Switch Replacement (J55) >> Installation Procedure

Installation Procedure

  1. GM2756211Courtesy of GENERAL MOTORS COMPANY

    Install the brake fluid level indicator switch (1).

  2. Ensure the locking tabs of the brake fluid level indicator switch are fully engaged in the master cylinder reservoir.
  3. Connect the brake fluid level indicator switch electrical connector.
  4. Reposition the radiator surge tank. Refer to Radiator Surge Tank Replacement (LFX, LF3) .
scientia non olet · About LEMON Manuals