Rear End Trim Finish Panel Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the rear compartment floor panel trim. Refer to Rear Compartment Floor Panel Trim Replacement . Partially remove the rear compartment opening weatherstrip. Refer to Rear Compartment Lid Weatherstrip Replacement .
1	Cargo Tie Down Loop Cap (Qty: 2)
2	Cargo Tie Down Loop Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 20 N.m (15 lb ft)
3	Cargo Tie Down Loop Assembly (Qty: 2)
4	Rear End Trim Finish Panel Assembly