Hood Primary and Secondary Latch Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Front Compartment Front Sight Shield Replacement
1	Hood Primary Latch Bolt [2x] CAUTION: Refer to Fastener Caution . tighten 22 N.m (16 lb ft)
2	Hood Primary and Secondary Latch Procedure Mark the position of the hood latch with a grease pencil. Disconnect the release cable from the hood primary latch. Disconnect the electrical connector. Align the hood primary latch if necessary.

Callout

Component Name

Hood Primary Latch Bolt [2x]

CAUTION:

tighten
22 N.m (16 lb ft)

Hood Primary and Secondary Latch

Procedure