LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Livery >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement >> Removal Procedure

Removal Procedure

  1. GM4783422Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Front Sight Shield (3) - Remove - Front Compartment Front Sight Shield Replacement 

  2. GM4783149Courtesy of GENERAL MOTORS COMPANY

    Front Compartment Side Sight Shield (2) - Remove - Front Compartment Side Sight Shield Replacement 

  3. GM4784305Courtesy of GENERAL MOTORS COMPANY

    Air Inlet Grille Panel (1) - Remove - Air Inlet Grille Panel Replacement

  4. GM4784652Courtesy of GENERAL MOTORS COMPANY

    Rocker Panel Molding (1) - Remove - Rocker Panel Molding Replacement

  5. GM4784340Courtesy of GENERAL MOTORS COMPANY

    Remove both front wheelhouse liners (1). Front Wheelhouse Front Liner Replacement

  6. GM4784343Courtesy of GENERAL MOTORS COMPANY

    Front Bumper Fascia (1) - Remove - Front Bumper Fascia Replacement

  7. GM4784653Courtesy of GENERAL MOTORS COMPANY

    Front Fender Upper Rear Molding (1) - Remove - Front Fender Upper Rear Molding Replacement

  8. GM4784654Courtesy of GENERAL MOTORS COMPANY

    Headlamp Bolt (1) - Remove

  9. Front Fender Nut (2) - Remove
  10. Front Fender Bolt (3) - Remove [3x]
  11. GM4784656Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Place protective covering over windshield at top rear bolt (1) to prevent windshield breakage

    Front Fender Bolt (1) Remove

  12. Front Fender Bolt (2) Remove [2x]
  13. Headlamp Bolt (3) - Remove
  14. Front Fender (4) - Remove
scientia non olet · About LEMON Manuals