Front Headlamp Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Bumper Fascia Replacement Front Compartment Side Sight Shield Replacement NOTE: Use care not to damage the fender when replacing the headlamp.
1	Headlamp Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Headlamp Procedure Disconnect the electrical connector. After installation, aim the front headlamps. Front Headlamp Aiming

Callout

Component Name

Preliminary Procedures

NOTE:

Use care not to damage the fender when replacing the headlamp.

Headlamp Bolt [4x]

CAUTION:

Tighten
2.5 N.m (22 lb in)

Headlamp

Procedure