Circuit/System Verification
- Ignition ON.
- Verify the scan tool Glove Box Unlatch Switch parameter changes from Inactive to Active to Inactive when pressing the appropriate switch on the S48D Multifunction Switch 2 - Instrument Panel.
- If the parameter does not change
Refer to Circuit/System Testing - Instrument Panel Compartment Door Release Switch Inoperative.
- Go to next step: If the parameter changes
- If the parameter does not change
- Verify the M91 Instrument Panel Compartment Door Unlatch Actuator activates when pressing the appropriate switch on the S48D Multifunction Switch 2 - Instrument Panel.
- If the M91 Instrument Panel Compartment Door Unlatch Actuator does not activate
Refer to Circuit/System Testing - Instrument Panel Compartment Door Latch Inoperative.
- Go to next step: If the M91 Instrument Panel Compartment Door Unlatch Actuator activates
- If the M91 Instrument Panel Compartment Door Unlatch Actuator does not activate
- All OK.