Front Seat Adjuster Track Finish Cover Replacement

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
1	Front Seat Adjuster Track Finish Cover CAUTION: Do not twist the cover during removal. Twisting the cover may cause the component to break. Procedure Adjust the seat to the full rearward position to gain access to the finish cover. Using a flat bladed tool, disengage the tabs by pushing outward from inside the track. Remove the finish cover by sliding the cover forward and then pull down on the finish cover to disengage it from the track.

Callout

Component Name

Front Seat Adjuster Track Finish Cover

CAUTION:

Do not twist the cover during removal. Twisting the cover may cause the component to break.

Procedure

Adjust the seat to the full rearward position to gain access to the finish cover.
Using a flat bladed tool, disengage the tabs by pushing outward from inside the track.
Remove the finish cover by sliding the cover forward and then pull down on the finish cover to disengage it from the track.