Rear End Trim Finish Panel Replacement

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Remove the rear compartment floor panel trim. Refer to Rear Compartment Floor Panel Trim Replacement . Partially remove the rear compartment opening weatherstrip. Refer to Rear Compartment Lid Weatherstrip Replacement .
1	Cargo Tie Down Loop Cap (Qty: 2)
2	Cargo Tie Down Loop Fastener (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 20 N.m (15 lb ft)
3	Cargo Tie Down Loop Assembly (Qty: 2)
4	Rear End Trim Finish Panel Assembly