Body Side Rear Window Garnish Molding Replacement

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedure Remove the quarter window trim finish panel. Refer to Quarter Window Trim Finish Panel Replacement .
1	Body Side Rear Window Garnish Molding Assembly Procedure The tether clip at the upper portion of the garnish molding MUST be replaced every time the body lock pillar upper trim panel is removed. Pull outward from the top front to release the upper portion of the molding, then move upward to release the tabs. Release the tether to remove.

Callout

Component Name

Preliminary Procedure

Remove the quarter window trim finish panel. Refer to Quarter Window Trim Finish Panel Replacement .

Body Side Rear Window Garnish Molding Assembly

Procedure

The tether clip at the upper portion of the garnish molding MUST be replaced every time the body lock pillar upper trim panel is removed.
Pull outward from the top front to release the upper portion of the molding, then move upward to release the tabs.
Release the tether to remove.