Seal Installation

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Seal Installation

Callout	Component Name
1	Front Differential Transfer Drive Gear Support Seal CAUTION: Ensure staking does not line up with lubrication holes or the holes may be damaged. Stop driving the seal once it bottoms out to avoid seal damage. NOTE: The fluid seal assembly must be staked in place using DT-49131 seal staking tool to ensure proper seal retention. Special Tools DT-46627-A Seal Installer DT-49131 Seal Staking Tool For equivalent regional tools, refer to Special Tools .
2	Front Differential Transfer Drive Gear Support Torque Converter Fluid Seal Assembly

Callout

Component Name

Front Differential Transfer Drive Gear Support Seal

CAUTION:

Ensure staking does not line up with lubrication holes or the holes may be damaged.
Stop driving the seal once it bottoms out to avoid seal damage.

NOTE:

The fluid seal assembly must be staked in place using DT-49131 seal staking tool to ensure proper seal retention.

Special Tools

DT-46627-A Seal Installer
DT-49131 Seal Staking Tool

For equivalent regional tools, refer to Special Tools .

Front Differential Transfer Drive Gear Support Torque Converter Fluid Seal Assembly