LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Automatic Transmission - 6T70 (M7U M7W), 6T75 (M7V), Or 6T80 (Mhm) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Rear Mount Replacement (AWD) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery tray. Battery Tray Replacement
  2. Remove the front exhaust pipe. Exhaust Front Pipe Replacement (LF3)Exhaust Front Pipe Replacement (AWD)
  3. Remove the propeller shaft from the vehicle. Propeller Shaft Replacement
  4. Remove the steering gear heat shield. Steering Gear Heat Shield Replacement (NXC)Steering Gear Heat Shield Replacement (NJ2)
  5. Remove the steering gear. Steering Gear Replacement (AWD, LFX, NXC)Steering Gear Replacement (AWD, LF3, NXC)
  6. Use a suitable jack to support the transmission.
  7. GM2201655Courtesy of GENERAL MOTORS COMPANY

    With a jack, slightly take the weight off the mount, and remove the transmission mount to frame fasteners (3, 4).

  8. Remove the transmission mount thought bolt (1).
  9. Remove the transmission mount from the vehicle (2).
scientia non olet · About LEMON Manuals