Transmission Brace Replacement

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the rear catalytic converter. Refer to Three-Way Catalytic Converter Replacement (Front-LFX)Three-Way Catalytic Converter Replacement (Rear-LFX)Three-Way Catalytic Converter Replacement (Front LF3)Three-Way Catalytic Converter Replacement (Rear LF3) . Support the transaxle with a transaxle jack.
1	Transaxle Brace Bolt CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Transaxle Brace Bolt Tighten 100 N.m (74 lb ft)
3	Transaxle Brace