Manual Shift Shaft and Seal Replacement
WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
|
Preliminary Procedures
- Remove the battery tray. Refer to Battery Tray Replacement
.
- Remove the manual shaft and position switch assembly. Refer to Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement .
|
| 1 |
Manual Shift Shaft Seal
- For seal removal use J 45201
Cooler Line Seal Remover.
- For seal installation use J-46626
Seal Installer.
- Lubricate the manual shaft with automatic transmission fluid (ATF) to prevent damage to the manual shift shaft seal.
Special Tools
- J 45201
Cooler Line Seal Remover
- J-46626
Seal Installer
|