LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Inline Harness Connector End Views (X433-X910)) >> Inline Harness Connector End Views >> X631 Rear Seat Armrest Jumper Harness to Armrest Harness (W68)

X631 Rear Seat Armrest Jumper Harness to Armrest Harness (W68)

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
GM1787798Courtesy of GENERAL MOTORS COMPANY
GM1787797Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Rear Seat Armrest Jumper
  • OEM Connector: Not Available
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 4-Way F
Connector Part Information
  • Harness Type: Armrest
  • OEM Connector: 13580899
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 4-Way M 1.5 Series (L-GY)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required No Tool Required No Tool Required Not Required Not Required Not Required Not Required
II Not Required No Tool Required No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
1 0.5 RD/BU 3240 I - Battery Positive Voltage 1 0.5 RD/BU 3240 II -
2 0.5 VT/GY 5310 I - Rear Sunshade Switch Express Signal 2 0.5 VT/GY 5310 II -
3 0.35 GY/GN 1102 I - Low Speed GMLAN Serial Data #2 3 0.35 GY/GN 1102 II -
4 0.5 RD/BU 450 I - Ground 4 0.5 RD/BU 450 II -