LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Inline Harness Connector End Views (X161-X314)) >> Inline Harness Connector End Views >> X164 Engine Harness to Throttle Jumper Harness (LF3)

X164 Engine Harness to Throttle Jumper Harness (LF3)

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
GM1986157Courtesy of GENERAL MOTORS COMPANY
GM1986159Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Engine
  • OEM Connector: 33472-0606
  • Service Connector: 13578533
  • Description: 6-Way F 150 MX Series, Sealed (BK)
Connector Part Information
  • Harness Type: Throttle Jumper
  • OEM Connector: Not Available
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 6-Way M
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-2A (GY) No Tool Required Not Required Not Required Not Required Not Required
II Not Required J-35616-3 (GY) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
1 0.5 YE 581 I - Throttle Actuator Control Open 1 0.5 YE 581 II -
2 0.5 BN/WH 582 I - Throttle Actuator Control Close 2 0.5 BN/WH 582 II -
3 0.5 BU/WH 3630 I - Throttle Position Sensor (SENT1) Signal 3 0.5 BU/WH 3630 II -
4 0.5 BK/BN 2752 I - Throttle Position Sensor Low Reference 4 0.5 BK/BN 2752 II -
5 0.5 BN/RD 2701 I - Throttle Position Sensor 5V Reference 5 0.5 BN/RD 2701 II -
6 - - - - - Not Occupied 6 - - - - -