LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Inline Harness Connector End Views (X314-X420)) >> Inline Harness Connector End Views >> X410 Body Harness to Left Rear Tail Lamp Harness (CZ2)

X410 Body Harness to Left Rear Tail Lamp Harness (CZ2)

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
GM1986157Courtesy of GENERAL MOTORS COMPANY
GM1986159Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 13577153
  • Service Connector: 19333336
  • Description: 6-Way F 150 MX Series, Sealed (BK)
Connector Part Information
  • Harness Type: Left Rear Tail Lamp Harness
  • OEM Connector: Not Available
  • Service Connector: 19333336
  • Description: 6-Way M
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required No Tool Required No Tool Required Not Required Not Required Not Required Not Required
II Not Required No Tool Required No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
1 0.5 BK 2550 I - Ground 1 0.5 BK 2550 II -
2 0.5 GY/YE 7542 I - Left Rear Stop Lamp Control 2 0.5 GY/YE 7542 II -
3 0.5 BK 2550 I - Ground 3 0.5 BK 2550 II -
4 0.5 BU/GY 809 I - Left Tail Lamp Control 4 0.5 BU/GY 809 II -
5 0.75 BU/WH 1334 I - Left Rear Turn Signal Lamp Control 5 0.75 BU/WH 1334 II -
6 0.35 WH/VT 6567 I - Rear Turn Lamp Feedback Signal 6 0.35 WH/VT 6567 II -