LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Inline Harness Connector End Views (X314-X420)) >> Inline Harness Connector End Views >> X398 Sunshade Jumper Harness to Body Harness

X398 Sunshade Jumper Harness to Body Harness

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
GM646420Courtesy of GENERAL MOTORS COMPANY
GM744044Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Sunshade Jumper
  • OEM Connector: 15332135
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 4-Way F 150 GT Series (BK)
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 15332136
  • Service Connector: 88953354
  • Description: 4-Way M 150 GT Series (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-2A (GY) No Tool Required Not Required Not Required Not Required Not Required
II Not Required J-35616-3 (GY) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
A 0.5 VT/BK 1239 I - Run/Crank Ignition 1 Voltage A 0.5 VT/BK 1239 II -
B 0.5 BK 2350 I - Ground B 0.5 BK 2350 II -
C 0.5 YE 5310 I - Rear Sunshade Switch Express Signal C 0.5 VT/GY 5310 II -
D 0.35 GN 24 I - Backup Lamp Control D 0.35 GN/WH 24 II -