LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2019 >> XTS Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions) >> Repair Instructions >> Engine Coolant Temperature Sensor Replacement (LF3)

Engine Coolant Temperature Sensor Replacement (LF3)

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
GM3299209Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Radiator Surge Tank Replacement (LFX, LF3)
1 Engine Coolant Temperature Sensor Retainer
NOTE:

Ensure that the engine coolant temperature sensor is properly seated and the sensor retainer is completely inserted after installing the sensor.

2 Engine Coolant Temperature Sensor

Procedure

  1. Disconnect the electrical connector.
  2. Reposition the engine wiring harness and hoses as necessary.
3 Engine Coolant Temperature Sensor Seal
Procedure 
Install a NEW seal.