Intake Manifold Cover Replacement (LF3)

WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Oil Cap
2	Intake Manifold Cover Fastener CAUTION: Refer to Fastener Caution . Tighten 9 N.m (80 lb in)
3	Intake Manifold Cover Procedure Pulled straight up on cover to disconnect from the ball studs. Install cover straight down on ball studs and ensure the oil fill tube is properly centered in the opening in the cover.

Callout

Component Name

Oil Cap

Intake Manifold Cover Fastener

CAUTION:

Refer to Fastener Caution .

Tighten
9 N.m (80 lb in)

Intake Manifold Cover

Procedure

Pulled straight up on cover to disconnect from the ball studs.
Install cover straight down on ball studs and ensure the oil fill tube is properly centered in the opening in the cover.