Engine Oil Pressure Sensor and/or Switch Replacement (LF3)
WARNING: This page is about a different car, the 2018 Cadillac XTS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the generator. Refer to Generator Replacement (LF3) . |
|
| 1 | Disconnect the oil pressure sensor electrical connector. |
| 2 | Engine Oil Pressure Sensor and/or Switch
CAUTION:
Refer to Component Fastener Tightening Caution . Tighten 20 N.m (15 lb ft) Special Tools EN-41712 Oil Pressure Switch Socket For equivalent regional tools, refer to Special Tools . |